Catenix Integrations

Point-of-care results filed in EMIS Web as structured values: captured at the bench, forwarded over HL7 v2 or a supported API.

Results into the record that runs UK primary care and community services, with QC kept separate and full traceability.

For private clinics on Semble: analyser results carried from the bench to the record and the patient report, with no LIS required.

Urgent care volume without manual entry: Catenix runs the bench and QC, Experity keeps the visit and billing.

Results into athenahealth with operator, device and QC history attached, over HL7 v2 or a supported API.

In-house testing connected to eClinicalWorks: device connectivity and quality governance feeding structured results to the chart.

Catenix forwards results over HL7 v2 and FHIR R4, so a system not named here is usually still reachable. See how the outbound feed works.

How to connect an Abbott Afinion 2 to your LIS or EHR with Catenix: results captured automatically over POCT1-A2, QC kept separate, audit trail retained.

Connect an Abbott i-STAT to your LIS or EHR through its data-management software and the Catenix gateway, with QC runs kept separate from patient results.

Connect an Abbott ID NOW to your LIS or EHR. Catenix captures results over HL7 v2 and POCT1-A2, keeps QC separate, and forwards them onward.

Connect the ACON On Call MultiPro to your LIS or EHR with Catenix. Results captured automatically over HL7 v2, QC kept separate, two-way messaging supported.

Connect a Bio-Rad D-10 to your LIS or EHR. Catenix captures results over ASTM (LIS2-A), keeps QC separate, and forwards them onward.

Connect a bioMerieux BIOFIRE FilmArray to your LIS or EHR. Catenix captures results over HL7 v2, keeps QC separate, and forwards them onward.

Connect a Boditech AFIAS 6 to your LIS or EHR. Catenix captures results over the AFIAS host interface, keeps QC separate, and forwards them onward.

Connect a Cepheid GeneXpert to your LIS or EHR. Catenix captures results over HL7 v2 (ASTM also supported), keeps QC separate, and forwards them onward.

Connect an EXIAS e|1 to your LIS or EHR. Catenix captures results over ASTM (CLSI LIS2-A2), keeps QC separate, and forwards them onward.

Connect a Fujifilm DRI-CHEM NX500 to your LIS or EHR. Catenix captures results over HL7 v2, keeps QC separate, and forwards them onward.

Connect a Fujifilm DRI-CHEM NX600 to your LIS or EHR. Catenix captures results over HL7 v2.5.1, keeps QC separate, and forwards them onward.

Connect a Mindray BC-5380 to your LIS or EHR. Catenix captures results over HL7 v2.3.1, keeps QC separate, and forwards them onward.

Connect a Nova Biomedical Prime Plus to your LIS or EHR. Catenix captures results over HL7 v2, keeps QC separate, and forwards them onward.

Connect Nova StatStrip glucose and ketone meters to your LIS or EHR through the Nova hub. Catenix captures results automatically and keeps QC data separate.

How to connect a Quidel Sofia 2 to your LIS or EHR. Catenix captures results through an on-site gateway, keeps QC data separate, and forwards them onward.

How to connect a Radiometer ABL90 FLEX blood gas analyser to your LIS or EHR: the interface it uses, what an on-site gateway does, and how QC stays separate.

Connect a Randox RX Daytona+ to your LIS or EHR. Catenix captures results over ASTM E1394, keeps QC separate, and forwards them onward.

How a Roche cobas Liat rapid PCR analyser connects to your LIS or EHR through Catenix, with automatic result capture, separated QC and a clear audit trail.

Connect a Roche cobas t 511 coagulation analyser to your LIS or EHR. Catenix captures results over HL7 v2, keeps QC data separate, and forwards them onward.

Connect a Seamaty SD1 clinical chemistry analyser to your LIS or EHR with Catenix. Results captured automatically, quality control kept separate from patients.

Connect a Siemens Atellica VTLi troponin analyser to your LIS or EHR. Catenix captures results over POCT1-A2, keeps QC separate, and forwards them onward.

Connect a Siemens Clinitek Status+ urinalysis reader to your LIS or EHR. Catenix captures results over POCT1-A2, keeps QC separate, and forwards them onward.

How the Siemens DCA Vantage HbA1c and urine ACR analyser connects to a LIS or EHR through Catenix, with results captured automatically and QC kept separate.

Connect a Siemens epoc Blood Analysis System to your LIS or EHR. Catenix captures results over HL7, keeps QC separate, and forwards them onward.

Connect a Snibe MAGLUMI X3 to your LIS or EHR through Catenix. Results are captured automatically, quality control stays separate, and data flows onward.

Connect a Werfen GEM Premier 4000 or 5000 blood gas analyser to your LIS or EHR. Catenix captures results automatically and keeps quality control separate.

Connect a Wondfo Finecare FS-114 to your LIS or EHR with Catenix. Results captured automatically over HL7, QC kept separate, full audit trail retained.

Connect a Zybio Z3 haematology analyser to your LIS or EHR. Catenix captures results over HL7 v2.3.1, keeps QC separate, and forwards them onward.

ASTM E1381 and E1394 are an older, serial-oriented way analysers send results. See how it works and how Catenix brings serial devices into one workspace.

A plain-English guide to HL7 v2 result messaging for point-of-care testing: what it carries, how it travels, why device dialects differ, and how Catenix helps.

Learn how Catenix forwards captured point-of-care results to your LIS or EHR over HL7 or FHIR, tracks every message, and keeps quality-control runs separate.

POCT1-A2 is a connectivity standard for point-of-care analysers. Learn how it works in plain terms and how Catenix captures results while keeping QC separate.