Connecting a Snibe MAGLUMI X3 to your LIS

If your clinic runs a Snibe MAGLUMI X3, you already know the routine: a sample finishes, a result appears on the analyser, and someone types that number into your patient record or reads it back to the requesting system. Manual transcription is slow, and every re-keyed value is a chance for a transposed digit. For a small clinic without a dedicated integration team, wiring an immunoassay analyser into the systems you already run can feel like a project you never quite have time to start.

This page explains, in plain terms, how a MAGLUMI X3 connects to a laboratory information system (LIS) or electronic health record, what that involves, and how Catenix captures results without changing the way your team works at the bench.

Quick answer

Yes, a Snibe MAGLUMI X3 can be connected to your LIS or EHR. The analyser speaks either HL7 v2 over a network link or the ASTM messaging family, and you choose the mode on the analyser to suit your site. Catenix reads results through a small on-site gateway whichever mode you run, keeps quality control data separate from patient results, and forwards the results on to the systems your site already uses.

What the MAGLUMI X3 measures

The MAGLUMI X3 is a chemiluminescence immunoassay analyser made by Snibe. Immunoassay analysers run tests that rely on antibodies binding to a target in a sample, and chemiluminescence is one common way to read the result: the reaction gives off light, and the amount of light relates to what is being measured.

From a connectivity point of view, the detail that matters is not the chemistry but the shape of the output. The analyser produces structured result records that can be sent to another system over a defined interface. Catenix is concerned only with moving those records reliably and keeping them organised. We make no claims about the analyser's clinical performance, and nothing here is diagnostic advice.

MAGLUMI and Snibe are trademarks of their respective owners. Catenix is an independent connectivity provider and is not affiliated with, endorsed by, or certified by the analyser's manufacturer.

How it connects

The MAGLUMI X3 offers a selectable interface. It can send results using HL7 v2, a long-established healthcare messaging standard, over a network connection, or it can use the ASTM messaging family, another widely used way for laboratory instruments to report results. You pick the mode on the analyser to match your site, and you do not have to commit to one before you begin.

HL7 v2 is a text-based message format that most LIS and EHR products can read. ASTM refers to a family of specifications originally written for laboratory instrument communication; depending on the setup it can run over a serial cable or a network link. Both are established, non-proprietary standards, and Catenix works with either.

Catenix connects through a small on-site gateway. This is a lightweight piece of software that sits on your network, close to the analyser, and listens for the result messages it produces. The gateway handles the local connection so that the analyser talks to something on the same site rather than reaching out across the internet by itself, then passes results securely up to your Catenix workspace. You can read more on our platform page.

Results and quality control in Catenix

When the gateway receives a result, Catenix captures it automatically and records it in your workspace, so the number that leaves the analyser is the number that lands in your record without anyone re-typing it. The original message is retained, which gives you an audit trail showing where each result came from and when it arrived.

Quality control is handled separately. Analysers produce QC results as well as patient results, and it matters that the two do not get mixed together. Catenix identifies QC material and keeps that data on its own track, so control runs stay visible to the people who monitor them without landing in a patient's record. Patient results can then be forwarded onward to your LIS or EHR, so the systems your team already relies on stay current.

Getting connected

To connect a MAGLUMI X3, a site needs the analyser configured to send results in either HL7 v2 or ASTM mode, a network on which the gateway can run, and agreement on where results should be forwarded. Most sites already have these pieces in place, so the work is in configuring and testing the link rather than buying anything new.

If you would like to talk through what your site would need, or to check whether your particular LIS or EHR is a good fit, get in touch. For how Catenix protects data in transit and at rest, see our security and trust pages, and for how connectivity is priced see pricing. You can also browse other analysers in our device library.

Questions clinics ask

Can I connect a Snibe MAGLUMI X3 to my LIS?

Yes. The MAGLUMI X3 can send results over HL7 v2 or the ASTM messaging family, both of which common LIS products can read. Catenix captures those results through an on-site gateway and forwards them to your LIS or EHR.

Do I have to choose between HL7 and ASTM before I start?

No. You select the mode on the analyser, and Catenix works with either. If your site changes the mode later, the connection can be reconfigured to match without starting over.

Will quality control results end up in patient records?

No. Catenix identifies QC data and keeps it separate from patient results. Control runs are tracked on their own, and only patient results are forwarded to your LIS or EHR.

What does the on-site gateway do?

It is a small piece of software that runs on your network near the analyser, receives the result messages the X3 produces, and passes them securely to your Catenix workspace. It means the analyser talks to something local rather than sending data across the internet on its own.

Does connecting change how my team uses the analyser?

No. Staff keep running samples the way they always have. Catenix captures results in the background, so there is no extra step at the bench and no manual transcription.

How do I find out if my setup is supported?

Tell us which analyser mode you run and which LIS or EHR you use, and we can confirm the fit. The quickest way to start is our contact page.

Product and company names mentioned are the trademarks of their respective owners. Reference to them is for identification only and does not imply any affiliation with, endorsement by, or certification from those owners. This page describes connectivity and data handling only and is not clinical advice.

Reviewed July 2026. Back to integrations. Going deeper on the standard: our HL7 v2 field guide.

Running something we have not listed?

We build analyser drivers to order, including for niche, regional and discontinued instruments. Tell us the make and model and we will tell you what is possible. Custom integrations or request a quote.